Stanco SSD7500

Posted by admin on December 5, 2019

Digital Timing Indicator:

Digital Timing Indicator SSD7500. The SSD7500 is a microprocessor-based high precision ignition timing and RPM indicator.

Features:

Simultaneous Indicating of RPM and DEG – Accurate Measurement of Ignition Timing – Precise Digital Readout of Engine Timing Degrees – Accurate Tachometer –

Sensor Failure Indication:

The Digital Timing Indicator gives a numerical readout of the ignition system timing point in degrees before or after top dead center. Input signals are from no.1 cylinder and a magnetic pickup to sense a top dead center reference.

The RPM and DEG values are displayed simultaneously on a backlighted LCD display.

Electrical Specifications:

Power requirement: 90-230V AC, 50-60 Hz or 100V-300V DC, 1VA-0.5VA or 1W-500mW

Timing Angle Measurement Measurement Range:

0° to ±179° (360 Degrees) with 1 Degree increment readout Internal Measurement Accuracy: ±0.1 DEG Tachometer

Tachometer range:

100 RPM to 2000 RPM with 1 RPM increment readout Internal Measurement Accuracy: ±0.1 RPM

Temperature Compensated Reference Oscillator Ambient temperature range:

-20°C to +70°C (limited by LCD display operating temperature range)

Sensor Inputs are compatible with all Magnetic Pickup and VR Sensors with the following specifications: Magnetic Pickup Pulse Output Requirements for RPM Input: 5V peak min. @ 1mA min. – VR Sensor Pulse Output Requirements for IGN Input: 30V peak min. @ 1mA min.

Sensor Inputs are compatible with all Magnetic Pickup and VR Sensors with the following specifications:

Magnetic Pickup Pulse Output Requirements for RPM Input: 5V peak min. @ 1mA min. – VR Sensor Pulse Output Requirements for IGN Input: 30V peak min. @ 1mA min.

StanCo Scientific Inc. | 5527 E. US Route 6, Unit 103-C Morris, Illinois 60450
Phone: 815-416-1422 | Fax: 815-416-1428